|
|
|
|
|
|
Normal Operating Speed
(meters per minute)
|
|
Machine TypeVariable
|
Normal Maximum Diameter mm
|
Minimum Diameter mm
|
Normal Maximum Wall mm
|
Maximum Diameter Admitted mm
|
Single
|
Two
|
Three
|
Variable
|
|
10.CR.0
|
3
|
1
|
1
|
3
|
|
|
|
|
|
10.CR.1
|
8
|
1.5
|
1.5
|
8
|
18
|
|
|
|
|
10.CR.1-1/2
|
13
|
3
|
2.5
|
13
|
36
|
30/60
|
30/40/60
|
4.5 to 90
|
|
10.CR.2
|
16
|
5
|
2.5
|
20
|
36
|
30/60
|
30/40/60
|
4.5 to 90
|
|
10.CR.2-1/2
|
22
|
6
|
3
|
28
|
60
|
45/90
|
45/60/90
|
4.5 to 90
|
|
10.CR.3
|
32
|
6
|
4
|
38
|
60
|
45/90
|
45/60/90
|
4.5 to 90
|
|
10.CR.4
|
40
|
10
|
5
|
50
|
75
|
60/120
|
60/80/120
|
6.0 to 120
|
|
10.CR.4-1/2
|
50
|
10
|
5
|
75
|
75
|
60/120
|
60/80/120
|
6.0 to 120
|
|
10.CR.6
|
75
|
16
|
6
|
114
|
75
|
60/120
|
60/80/120
|
6.0 to 120
|
|
10.CR.8
|
140
|
25
|
10
|
178
|
45
|
|
|
6.0 to 120
|
|
10.CR.9
|
190
|
40
|
12
|
228
|
45
|
|
|
4.5 to 90
|
Achieving Results
Through experience and technical knowledge, Bronx/Taylor-Wilson’s tube straightening machines deliver compelling solutions to the market by:
Enhanced Efficiency
• Roll angles are quickly and easily adjusted to provide line contact with the tube surface over the maximum effective roll profile.
• Set up time is minimized though our patented COMPuter Aided Setting System.
Improved Quality
• Hydraulic lift mechanism on the roll entry automatically adjusts roll position to prevent damaging tube ends.
• A range of heavy-duty style machines provide enhanced rigidity, with consistent straightness and roundness.
• The COMPASS software package can be customized to provide management, maintenance and quality control information, including: calibration and wear compensation; maintenance information; fault finding; and mimic flow diagrams.
Superior Technology
• Unique design allows thin walled tube to be straightened accurately without surface blemishes.
• The ability to straighten at speeds up to 200 meters per minute (approximately 600 fpm).
• Hydraulic lift mechanism with sensor automatically adjusts rolls to accept upset pipe.
• Pressure sensing units may be fitted on each roll to provide an accurate indication of the pressure applied to the tube.
Safety
• The drives are set in the back of the machine, away from the operator.
• The machine operator has a complete view of the straightening process from the operating console.
|
